Reach Forklifts
Space is normally at a premium in most distribution centers or warehouse environments. The less space needed for aisles in which to use equipment, the more room overall you would have to store goods and products. Thus, particular equipment has been intended for operating in really narrow aisles so as to maximize space and efficiency.
Reach Trucks
The specialized reach lift truck has a mast that extends away from the body of the forklift. It usually is attached with a scissor mechanism. When the scissor is compacted or drawn in, the forklift becomes a lot narrower that the regular forklift.
Operator Position
Reach trucks are designed so the operator could stand while in operation of the machinery. This is a contrast to the regular lift truck where the driver is normally sitting. The standing operation area reduces the amount of room needed for the compartment of the operator, allowing the machine to achieve an even smaller profile overall.
Space Saving
With a reach truck, aisles could be made as narrow as 7 feet. The majority of standard forklifts require a minimum aisle space of roughly 11 feet; therefore, utilizing a reach truck gives around a savings of 5 feet on each and every aisle. When renting a warehouse on a square foot basis, this is a significant amount of space.
Unique Controls
Normally, a reach truck is steered utilizing a rotating lever situated beside the driver on a platform. There is one more lever used to control reverse and forward, the mast and for extending the mast. These controls are somewhat different compared to standard forklift controls.
Load Capacity
Normally, the load capacity for a reach truck is less than that of a regular forklift, depending on the type. This is largely because of the narrow design of the equipment, which could lead to a very high center of gravity. When the load is raised and the mast is extended fully, this is actually true.