Most of the time, companies will spend lots of money to buy their lift trucks. It is vital, therefore to take good care of your machinery to protect your investment into the long run. It is a great idea to know the procedures that are undertaken during taking care of and maintaining this equipment.
By starting up the forklift and listening carefully how it runs is amongst the best ways to tell how good the engine is running. For instance, if there are any knocks or misses, the machine is defective and this should raise several concerns. Furthermore listen carefully for any squealing noise which come from the belts as these sounds would provide you with a wealth of information.
Some of the main parts requiring attention during maintenance consist of the horn, safety warning devices, gauges, the lights and the overhead guard. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also vital to check the wiring.
The battery compartment terminals must be cleaned after the above components have been inspected carefully. If the terminals are not clean, be sure to clean them well. Every battery cell needs to be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The hydraulic filter, the transmission filter and the fuel filters should be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the issue accordingly. Next, check each and every other component of the machinery including the wheels. If any type of issue or fault is detected, be sure to deal with it immediately in order to make sure the machinery is working at its safest and optimum levels.